Mine Anchor Cable The manufacturer will briefly explain the construction methods for installing anchors. Mine anchor cable manufacturer: What methods are usually used to construct and install anchors?

　　Mine anchor cables are widely used in slope protection, bridge and culvert construction, foundation reinforcement, and coal mine support due to their strong anchoring force. They can be used for prestressing and full-length anchoring, and the length of the anchoring depth can be freely selected. How much do you know about the installation methods of anchor construction? In cities and factories, complex old bridges or structures, such as buildings, factories, chimneys, water towers, and various foundations, are frequently used in construction and installation. Here's a special introduction:

　　1. Simple Construction Method

　　The simplified construction method, also known as the prestressed anchor construction and installation method, belongs to small-scale anchor construction and installation. This is a simple structure where a cylinder with a diameter of 28-75 mm and a depth of 1-sm is drilled into the rock and installed through an anchoring structure. Simplified construction can use air drills or manual drilling, followed by charging during simplified construction. The simple method can be used for foundation pit excavation, stone mining, and thawing frozen soil, but its anchor construction and installation volume is small, efficiency is low, and the amount of drilling work is large.

　　2. General Anchor Construction and Installation Method

　　The general anchor construction and installation method involves placing a small amount of explosives at the bottom of the blasting hole. After several anchor construction and installations, it expands into a spherical shape, and then explosives are loaded for anchor construction and installation. Compared with the hole anchor construction and installation method, this method has the advantages of good anchor construction and installation effect, high efficiency, fast progress, and low explosive consumption. This method is often used in the construction and installation of short-pile anchors in shallow foundations.

　　Mine anchor cable manufacturer: The use and storage of mine anchors are very important

　　For mine anchor cables, usage and storage are also important. For storage, in order to prevent any rust on the mine anchor for the next use and to ensure normal use, users should pay attention to the actual storage process. When using mine anchors, there should be no rust, water, or other debris.

　　The foam in the box can be removed with the working clamp of the mine anchor cable, but when the prestressed beam is long and the anchor needs to be repeatedly tensioned, it is recommended to apply a small amount of lubricant (such as anchor releasing agent) inside the anchor plate cone hole. This is not only beneficial for the subsequent anchor releasing of the working clamp but also for multiple anchoring. Applying lubricant to the outer surface of the tool clamp and the inner surface of the anchor plate cone hole before use and regularly cleaning the impurities on the clamp surface can make the anchor removal flexible. However, if the clamp is cracked or the tooth surface is damaged, it needs to be replaced and cannot be reused.

　　 Mine Anchor Cable This is the end of the introduction. Thank you for your time. If you need to purchase mine anchor cables, please contact our company.